MSI P45T-C53 Series Manual page 30

▍ ▍
Hardware Setup Hardware Setup
Fan Power Connectors: CPUFAN1,SYSFAN1,SYSFAN2
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
CPUFAN1
Important
Please refer to the recommended CPU fans at processor's offical webste or consult
•
the vendors for proper CPU coolng fan.
• CPUFAN1 support Smart fan control. You can nstall Dual Core Center utlty that
wll automatcally control the CPUFAN1 speeds accordng to the actual CPUFAN1
temperatures.
• Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN1.
CD-In Connector: JCD1
Ths connector s provded for external audo nput.
2-14
SYSFAN1/ 2