Vivotek SUPREME SD9364-EHL User Manual page 19

Mechanical Dimensions
Shown below are the dimensions of the wall mount bracket and its mounting holes:
You can find the installation instructions on VIVOTEK's website for other options such as para-
pet mount: http://www.vivotek.com/web/product/accessories.aspx
NOTE:
1. This equipment is only to be connected to PoE networks without routing to outside plants.
2. For PoE input, use only UL listed I.T.E. with PoE output.
Tips:
1. If you forget the root (administrator) password for the camera, you can restore the camera
defaults by pressing the reset button for longer than 5 seconds.
2. If DHCP is enabled in your network, and the camera cannot be accessed, run the IW2 utility
to search the network. If the camera has been configured with a fixed IP that does not comply
with your local network, you may see its default IP 169.254.x.x. If you still cannot find the
camera, you can restore the camera to its factory defaults. The factory default is DHCP client.
3. If you change your network parameters, e.g., added a camera via a connection to a LAN card,
re-start the IW2 utility.
VIVOTEK
User's Manual - 19