Pontiac 2006 Montana SV6 Owner's Manual page 13

Fold and Tumble Feature
The second row bucket seats can be folded and
tumbled forward. Use this feature for exiting and
entering third row seats, if the vehicle has them.
1. Make sure the adjustable head restraints are in the
fully lowered position.
3. Slide the seat all the way back in this position.
2. Fold the seatback flat
on the seat, by either
pulling on the nylon
strap, located on the
rear right hand side of
the seat, or by lifting
the recline lever,
located on the front
right hand side of
the seatback.
To return the seat to the original position, do the
following:
1. Align the seat so that the rear hooks on the seat
are over the rear floor pins. Push down firmly on
the rear of the seat so that the rear hooks attach to
the rear floor pins.
2. Try to raise the seat to check that it is locked to
the floor.
4. Release the rear set of
seat hooks from the
floor pins by pulling
either the nylon strap,
located at the base of
the seat, or the release
handle located on the
side of the seat. Use
the strap to guide the
seat forward.
1-7