Clock Functions - AEG BPE556120M User Manual

12 www.aeg.com
Sensor field / Button
6.8 Heat-up indicator
When you activate an oven function, the
bars in the display

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Turn the knob for the temperature
right or left to set the hours.
2. Press
the minutes.
The display shows
hour. "00" flashes.
Function
CLOCK
TEMPERATURE
PLUS STEAM
come on one by
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
and
to confirm and switch to set
and the set
Description
To set a clock function.
To check the oven temperature or the
temperature of the core temperature sen-
sor (if applicable). Use only while a heat-
ing function operates.
To turn on the True Fan Cooking PLUS
function.
one. The bars show that the oven
temperature increases or decreases.
Application
To show or change the time of day. You can change the
time of day only when the oven is off.
To set how long the oven operates. Use only when an
oven function is set.
To set when the oven turns off. Use only when an oven
function is set.
Combination of DURATION and END function.
Use to set a countdown time. This function has no ef-
fect on the operation of the oven. You can set the MI-
NUTE MINDER at any time, also if the appliance is off.
3. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
7.3 Setting the DURATION
1. Set an oven function.
2. Press
starts to flash.
to confirm or the set time of
flashes in the display.
again and again until