MSI P45 Diamond Series Manual page 45

M S-7516 M ainboard
3. Slip the 6mm clamp over the tubing.
4. Attach the tubing to the water block and use pliers to cinch the 6mm clamps over
the tubing and waterblock
5. Clip the tubing as shown in the figure below.
6. Put the tubing through the bracket holes.
7. Slip the 6mm clamp over the tubing before inserting the adapter fitting into
the tubing.
8. Inserting the adapter into the turing.
9. Use pliers to cinch the 6mm clamp over the tubing and adapter fitting.
10. Use the same way to install another adapter, as shown in the figure below after
the completion.
2-30