Ports & Devices - Axis M1143-L User Manual

AXIS M1143-L - User Manual
System Options
An SD card inserted into the product can be manually formatted to one of the supported file systems. To manually format the
SD card, follow these steps:
1. Insert the SD card in the SD card slot.
2. Open the Axis product's webpages and go to Setup > System Options > Storage.
3. Click SD Card.
4. Click Format and select the desired file system.
5. Click OK to start formatting the card.
Network Share
Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for
recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to
www.axis.com/products/cam_companion_software/supported.htm
Note
For NAS recommendations see www.axis.com
To add a network share:
1. Go to System Options > Storage.
2. Click Network Share.
3. Enter the IP address, DNS or Bonjour name to the host server in the Host field.
4. Enter the name of the share in the Share field. Sub folders cannot be used.
5. If required, select The share requires login and enter the user name and password.
6. Click Connect.
To clear all recordings and data from the Axis product's folder on the designated share, click Clear under Storage Tools.
To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings
older than and select the number of days or weeks.
To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.
Ports & Devices
I/O Ports
Configure the input and output ports supported by your Axis product from System Options > Ports & Devices > I/O Ports. Ports can
be given descriptive names, and their Normal state can be configured. For more information about this see the online help
For information regarding how to connect the input and output on this product see .
The auxiliary connector on the Axis product provides two configurable input and output ports for connection of external devices. For
information about how to connect external devices, see the Installation Guide, available on www.axis.com
The Axis product provides one input port and one output port for connection of external devices. For information about how to
connect external devices, see Connectors on page 79.
The Axis product provides two configurable input and output ports for connection of external devices. For information about
how to connect external devices, see Connectors on page 79.
The Axis product provides four configurable input and output ports for connection of external devices. For information about
how to connect external devices, see Connectors on page 79.
66
.