Siemens SITRANS LG240 Operating Instructions Manual page 42

Menu - Setup
Menu
Setup
Setup
42
The following reset functions are available:
Delivery status: Restores the parameter settings at the time of ship-
ment from the factory, incl. order-specific settings. Any stored false
signal suppression or user-programmed linearisation curve, as well
as the measured value memory, are deleted.
Basic settings: Restores the parameter settings, incl. special param-
eters, to the default values of the respective instrument. Any stored
false signal suppression or user-programmed linearisation curve, as
well as the measured value memory, are deleted.
The following table shows the default values of the instrument. De-
pending on the instrument version or application, all menu items may
not be available or some may be differently assigned:
Menu item
Lock adjustment
Measurement loop name
Units
Probe length
Type of medium
Application
Medium, dielectric constant
Superimposed gas phase
Dielectric constant, upper medium (TS)
Tube inner diameter
Max. adjustment - Level
Min. adjustment - Level
Max. adjustment - Interface
Min. adjustment - Interface
SITRANS LG240 - Operating Instructions
Default value
Released
Sensor
Distance unit: order-specific
Temperature unit: order-specific
Länge der Messsonde factory set-
ting
Liquid
Level, vessel
Water-based, > 10
Yes
1.5
200 mm
100 %
Distance: 0.000 m(d) - note block-
ing distances
0 %
Distance: Probe length - take dead
band into account
100 %
Distance: 0.000 m(d) - note block-
ing distances
0 %
Distance: Probe length - take dead
band into account
PBD-51041038