Rayco RG74T-R Operator, Service, Maintenance Manual page 29

Keypad Remote (BackUp)
4
5
Should your remote control fail, or batteries die in the field,
the RG74T-R comes equipped with a Keypad Remote (4).
The keypad is located in the compartment next to ignition
key location. To utilize the keypad, lift the right side hood,
unscrew the nuts (5) holding the keypad attached to the
ceiling of the compartment.
Once the keypad is removed from compartment, plug in the
keypad connector (8) with the harness (6) fastened in the
side compartment along the fuel tank side as shown. Twist
the plastic cover cap (7) on the back of the machine where
the display is. Plug the keypad harness into the receptacle.
Connect the other end of the harness to the plug of the keypad.
800.392.2686
RG74T-R Operator · Service · Maintenance
7
13
11
9
10
12
9. Left Track Forward
10. Left Track Reverse
11. Raise Blade
12. Lower Blade
13.Tracks In
14.Tracks Out
15.Swing Cutter Boom
Left
Operation
6
17
14
19
16
18
15
16. Swing Cutter Boom
Right
17. Raise Cutter Boom
18. Lower Cutter Boom
19. Right Track Forward
20. Right Track Reverse
20
8
29