System Event Log - Gigabyte S451-3R1 User Manual

5-4-1 System Event Log

Parameter
Enabling / Disabling Options
SEL Components
Erasing Settings
Erasing SEL
When SEL is Full
Custom EFI Logging Options
Log EFI Status Codes
BIOS Setup
Description
Change this item to enable or disable all features of System Event
Logging during boot.
Options available: Enabled/Disabled. Default setting is Enabled.
Choose options for erasing SEL.
Options available: No/Yes, On next reset/Yes, On every reset. Default
setting is No.
Choose options for reactions to a full SEL.
Options available: Do Nothing/Erase Immediately. Default setting is Do
Nothing.
Enable/Disable the logging of EFI Status Codes (if not already converted
to legacy).
Options available: Disabled/Both/Error code/Progress code. Default
setting is Error code.
- 94 -