Pci Subsystem Settings - Gigabyte S451-3R1 User Manual

5-2-4 PCI Subsystem Settings

Parameter
PCI Bus Driver Version
PCI Express Slot # I/O ROM
Onboard LAN1 / LAN2 / LAN3 / LAN4
Controller
(Note2)
Onboard LAN1 / LAN2 / LAN3 / LAN4
I/O ROM
(Note2)
PCI Devices Common Settings
Above 4G Decoding
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available LAN controller.
BIOS Setup
Description
Displays the PCI Bus Driver version information.
When enabled, this setting will initialize the device expansion
ROM for the related PCI-E slot.
Note1)
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN1 / LAN2 / LAN3 / LAN4
devices.
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN1 / LAN2 / LAN3 / LAN4
devices, and initializes device expansion ROM.
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is Enabled.
- 56 -