Philips WelcomeEye Connect 2 User Manual page 16

a
a: To activate or deactivate voice message function.
b: To play back the recorded voice message.
c: Allows you to start and stop recording a voice message (maximum message length: 15s.).
6: Configuring WelcomeEye system options
a
a: Activation of a second intercom panel (choose On if a second intercom panel is used).
b: Activation of the camera option (choose On if a camera is used).
c: Configuration of the monitor(s). When the system has several monitors, you must configure
one Master monitor and Slave monitors. If the system only features one monitor, choose
Off.
d: Activating energy saving mode of the videophone. When the energy saving mode is
activated (On), the product's energy consumption is reduced. The intercom panel is
placed on standby, therefore the monitor no longer receives calls.
7: Audio settings
a b
a: Choice of ringtone during a call from intercom panel 1
b: Choice of ringtone during a call from intercom panel 2 (only if an additional intercom
panel has been configured)
c: Choice of ringtone during an intercom call (only if an additional monitor has been
configured)
d: Volume settings for the monitor ringtone
e: Volume settings for the monitor loudspeaker during communication.
8: Image settings
Image brightness, contrast and colour settings.
9: WIFI network management (only on WelcomeEye Connect 2)
EN12
b c
b c
c d
WelcomeEye Connect 2 / Touch / V1
d
e