PRO SIGNAL PSG03928 Manual

Compact 3 channel stereo amplifier with dac, 30w rms

Download this manual

Compact 3 Channel Stereo Amplifier with DAC, 30W RMS

Please read these instructions carefully before use and retain for future reference.

IMPORTANT SAFETY INFORMATION

When using electrical appliances basic safety precautions should always be followed.

•

To prevent fire or shock hazard, do not expose this product to rain or moisture.

•

Only use the PSU supplied or one of identical specification.

•

Beware that listening for long periods and at high volume levels may cause fatigue

and hearing damage.

PSG03928

Page 1 Compact 3 Channel Stereo Amplifier with DAC, 30W RMS PSG03928 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION When using electrical appliances basic safety precautions should always be followed. • To prevent fire or shock hazard, do not expose this product to rain or moisture.
Page 2 OVERVIEW • A compact 30W, (2 x 15W RMS) 3 input channel stereo amplifier with built-in DAC (Digital To Analogue Converter). • Ideal for adding external speakers to computers, DVD players, TVs, MP3 players, Digital Mini Disc etc. CONNECTIONS • Connect analogue source equipment to the 3.5mm stereo jack, the L and R RCA Phono, as required using suitable cables.
Page 3 OPERATION • If digital equipment is connected, select either the Coaxial or Optical input using the Input Source switch on the front panel. • The source analogue input is selected by using the three push buttons on the front panel. •...
Page 4 CLEANING & MAINTENANCE • Clean the outside casing with a soft cloth lightly moistened with a mild detergent • Never use any abrasive or solvents. INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC EQUIPMENT. When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.