PRO SIGNAL PSG03928 Manual

4 way stereo headphone distribution amplifier

4 Way Stereo Headphone Distribution Amplifier

Please read these instructions carefully before use and retain for future reference.

IMPORTANT SAFETY INFORMATION

When using electrical appliances basic safety precautions should always be followed.

•

To prevent fire or shock hazard, do not expose this product to rain or moisture.

•

Only use the PSU supplied or one of identical specification.

•

Beware that listening for long periods and at high volume levels may cause fatigue

and hearing damage.

PSG03928

Table of Contents

Do you have a question about the PSG03928 and is the answer not in the manual?

Page 1 4 Way Stereo Headphone Distribution Amplifier PSG03928 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION When using electrical appliances basic safety precautions should always be followed. • To prevent fire or shock hazard, do not expose this product to rain or moisture.
Page 2 OVERVIEW • A compact solution to connect up to 4 headphones taking the feed from either a 3.5mm stereo or line level phono output with pass through. CONNECTIONS • Connect analogue source equipment to the 3.5mm stereo jack or the L and R RCA Phono, as required using suitable cables.
Page 3 OPERATION • When the source equipment is outputting a signal it can be heard through the headphones. • Adjust the volume for each set using the rotary controls on the front panel. SPECIFICATIONS Output Power: 105mW (rms) per channel THD+N: 0.05% (@ RL = 16R, F = 1kHz) Power Supply: 12V DC, 2A PSU...
Page 4 INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC EQUIPMENT. When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.