Instruction For Use - Intec i-Starter 3.5 Manual

INSTRUCTIONS FOR USE
Indicator
Press the push button in order to check the charge state of the device.
Indicator
Charge level
One led at a time will flash in the indicator during recharge. Steady-on-lights
indicate the charge level. The indicator switches off once fully charged.
Recharge instructions
1. Plug the home charger into the USB cable.
2. Connect the Micro connector to the i-Starter 3.5 host.
Jump start 12V vehicle Instruction
Connect the blue plug fully seated into the host, and
make sure the Cable Indicator is off.
Switched off 1 Led
0% 25%
2 Led 3 Led
50% 75%
English
4 Led
100%
11