Instruction For Use - Intec i-starter 6.0 User Manual

INSTRUCTIONS FOR USE
Indicator
Press the switch to check the charge state of the device.
Indicator
Charge level
The indicator will flash one by one during the period of charging. Different number of sol id
indicators show different storage level of device. All indicators light off when the charging is
paused or completed.
Recharge instructions
1. Plug the home adaptor into the universal socket.
2. Connect the USB-C connector to the jump starter host
Jump start 12V vehicle Instruction
1. Connect battery clamps to car battery terminals correctly. Red Clamp to the positive(+)
battery terminal, Black Clamp to the negative(-) battery terminal.
2. Make sure Starting state indicator light (9) becomes green solid, then you can try to start your
vehicle. If the light is green flashing, or green/red flashing or simply off, please go ahead to
"Starting state indicator legend".
3. Start engine successfully, remove the blue plug from the host.
Unlit 1 Led
0% 25%
1 2
2 Led 3 Led
50% 75%
.
3
English
4 Led
100%
11