Technical Specifications - Intec i-Starter 3.5 Manual

Charging of cell phones and tablets
1. Plug the switch cable to Quick Charge output port.
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Touch the switch button, it can recognise eletronic products's suitable
parameters, start to charge for mobile phone/tabletc etc.
For power supply to 12V vehicle products or 12V electronics
1. Plug the optional switch cable to 15V 10A output port.
2. Connect the optional switch cable and 12V vehicle product or 12V electronics
3. Press the switch button to power supply.
Use of the LED lamp
Press the switch 3 seconds to start the LED flash light.
There are 4 modes of LED light appear in order (normal, strobe. SOS, off) if you
press slightly.

TECHNICAL SPECIFICATIONS

Lithium Battery Capacity (LiPo)*
Outputs
Input socket
Recharge time
Power
Operating temperatures
Sizes
Weight
(*) Lithium polymer Battery
17000mAh (62.9Wh)
5V-2.1A; Quick Charge (5V-2.4A; 9V-2A;
12V-1.5A); 12V jump start
Quick Charge 5V / 9V
About 4 hours
700A
-20°C / 60°C
231.5x90.5x29.5 mm
640 gr
English
13