Pipe Insulation - Panasonic WH-SXC12H6E5 Service Manual

WIRE STRIPPING AND CONNECTING REQUIREMENT
Wire stripping
No loose strand when insert

Pipe Insulation

1. Please carry out insulation at pipe connection portion as mentioned in Indoor/Outdoor Unit Installation Diagram.
Please wrap the insulated piping end to prevent water from going inside the piping.
2. If drain hose or connecting piping is in the room (where dew may form), please increase the insulation by using
POLY-E FOAM with thickness 6 mm or above.
Indoor/outdoor
connecting terminal
board
5 mm or more
(gap between wires)
Conductor over
Conductor fully
insert
insert
ACCEPT PROHIBITED
Conductor not
fully insert
PROHIBITED