Taking Apart Your Loft - Community Playthings The Community Loft Model 2 Corner Product Manual

TakING aPaRT yOUR LOfT

Before taking apart your loft, read all of the
instructions, and get a friend to help. If you
plan to store your loft, remember it is made of
wood, and needs to be stored in a dry place.
2
To remove circular plug between
platforms, insert a flat screwdriver from
below to pry up the plug.
This picture shows platforms removed for
clarity. Remove platforms only after plug
has been removed.
22
1
Start at the top of the loft and work down-
ward. Unlock the childproof caps on the
posts by putting a flathead screwdriver
all the way into any hole on the cap. Use
the screwdriver, pointed slightly up, as a
handle to crank counterclockwise. You
will hear a clicking sound as it turns.
3
Remove the top connector rings from one
panel. Lift it out of the bottom rings and
hand it down to your friend. Do not take
all the top rings off at once; this could
cause instability and falling panels. Work-
ing together, continue around removing
one panel at a time.
The Community Loft