Britax SKYLINE User Manual page 22

Britax Child Safety, Inc.
4. Attach the lower connectors.
a. Verify the lower anchor adjuster straps are not twisted.
b. Using the lower anchor farthest from you for easiest
positioning push the lower connectors onto their adjacent
lower anchors as shown.
NOTE: You may need to turn the back of the booster seat
towards you for easier access to the lower anchors.
c. A click helps confirm lower connectors are attached. Pull on
lower connectors to confirm a secure attachment.
IMPORTANT: If a click is not heard when connecting the lower
connectors, the lower anchor adjuster strap may be twisted or there
may be debris in the lower connector. Correct either situation before
continuing with the positioning process.
5. Guide the booster seat into place while pulling the lower anchor
adjuster strap on either side of the booster seat to remove slack.
NOTE: Only tighten until the slack is removed from the lower
anchor adjuster strap. Over-tightening the strap can force the
backrest of the booster seat forward.
20