Putting Your Trolley Into Manual Mode - CartTek Yellowstone User Manual

PUTTING YOUR TROLLEY
INTO MANUAL MODE
• With your cart in ready mode (solid blue status LED), turn speed
dial back to zero – counter clockwise. There will be a hard stop at
Zero.
• Press and release the start/stop button to engage trolley mode.
• Rotate speed dial clockwise to increase the speed of caddy.
• Rotate speed dial counter-clockwise to decrease the speed of the
caddy.
• In manual mode there are three ways to stop your caddy.
» Turn the speed dial backwards, to zero.
» Push the On/Off button on the end of the handle.
» Push one of the "Stop" buttons on the remote control.
• To resume use in manual mode, either press the on/off switch
to resume the currently set speed, or turn the speed dial back to
zero and then turn the speed dial clockwise to the desired speed.
14
carttek.com