HP F660 Series User Manual page 32

3.5 Parking Mode
To monitor the vehicle when it is parked, you can activate Park
Recording, or Motion and Collision Detection, or Timelapse.
Before you activate Parking Mode, please install ACC cable
through professional car service shop.
Follow the steps below to change the settings for Parking Mode:
1. Press the button to enter the OSD menu.
2. Press the / button to select Parking Mode, and then
press the button for entering function menu.
3. Press the / button to configure Parking Mode (Park
Recording / Motion and Collision Detection / Timelapse/ Off),
and then press the
4. Press the button to return recording screen.
Note: ACC cable is not included in the package. Please ask for more information from your
distributor.
3.5.1 Park Recording
- In normal recording, press and hold POWER key for 3
seconds, the screen will show message "Press OK key to
power off or enter Park Recording after 10 sec." Please
wait for 10 seconds and the camcorder will enter Park
Recording automatically. The camcorder will turn off the
screen temporarily, but still in recording status. Once the
collision or vibration is detected, it will automatically trigger
emergency recording.
- To disable this function, press any key to wake up the screen,
and press again any key to resume to normal loop recording.
Note:
1. The video file taken in this mode is same as normal loop recording mode. It will be saved in
the "Video" folder. And the emergency file will be saved in the "Emergency" folder.
2. The file size is according to Record Interval setting.
button to complete setting.
31