Eco Function - Mercedes-Benz 2011 CL-Class Operator's Manual

Vehicle
230
COMAND controller and press W to
confirm.
Main area ; is active.
X
Select the individual vehicle functions by
sliding XVY or turning cVd the COMAND
controller and press W to confirm.
Opening from the "Vehicle" menu
X
Vehicle
Select
sliding XVY and turning cVd the
COMAND controller and press W to
confirm.
The "Vehicle" submenu opens.
X
Select the individual vehicle functions in
the menu by sliding XVY or turning cVd
the COMAND controller and press W to
confirm.
In the next section, it is the first procedure
that is always described.
Switching the ECO function on/off
The ECO start/stop function switches the
engine off automatically when the vehicle is
stopped under certain conditions. When
pulling away again, the engine starts
automatically (
the ECO start/stop function on and off using
COMAND.
If you switch the ECO start/stop function off
using COMAND, the function is switched on
again automatically when you switch the
ignition off and on again.
in the main function bar by
Y page 270). You can switch
X
To switch the ECO start/stop function
Vehicle
on/off: select
function bar by sliding XVY and turning
cVd the COMAND controller and press
W to confirm.
The main area is active.
X
ECO
Select the function by sliding XVY or
turning cVd the COMAND controller and
press W to confirm.
The ECO start/stop function is switched on
and off alternately.
Extending/retracting the rear window
blind
! Make sure that the rear window blind can
move freely. Otherwise, the blind or other
objects could be damaged.
i The rear window blind is deactivated at
temperatures below -20 †.
X
To extend/retract the rear window
Vehicle
blind: select
bar by sliding XVY and turning cVd the
in the main
in the main function