Premise; Safety Warnings; Warnings For The Installer; Warnings For The User - Whirlpool ENTRY BASIC Instruction, Use And Maintenance Manual

1 PREMISE

Dear customer, we would like to start by saying thank you and we congratulate you for having purchased our product.
To enable you to use your new Oven in the best way possible, please carefully follow the information provided in this manual.
The ovens to which this manual refers, have been exclusively designed to satisfy the requirements for cooking pizza and other
similar products.
The destination of use described above and the configurations envisaged for this equipment are the only ones permitted by
the Manufacturer: do not use the equipment other than according to the instructions provided.
The installation has to be performed by qualified personnel only, able to ensure the highest operation and safety conditions.

2 SAFETY WARNINGS

Warnings for the installer

On receipt of the oven check that the set up and configurations are compliant with local regulations as well as regulations that
apply at a national and European level.
•
Follow the prescriptions contained in this manual.
•
Do not carry out loose electrical connections with temporary or non-insulated cables.
•
Check to make sure the earthing of the electrical system is efficient.
•
Always use personal protection equipment and other means of protection required by law.

Warnings for the user

The environmental conditions of the oven installation place must have the following characteristics:
•
It has to be dry;
•
The water and heat sources have to be positioned at a suitable distance;
•
Ventilation and adequate lighting system compliant with the rules of hygiene and safety foreseen by the laws in force;
•
The floor must be flat and compact to facilitate thorough cleaning;
•
No kind of obstacle that could condition normal ventilation of the oven must be placed in its immediate vicinity.
In addition, the user must:
•
Pay careful attention to prevent children from approaching the oven when it is operating;
•
Observe the prescriptions contained in this manual;
•
Not remove or tamper with the oven safety devices;
•
Always pay maximum attention, in terms of observing their work and not using the oven if distracted;
•
Adhere to instructions and warnings identified by labels and signs displayed on the oven.
•
The labels and signs are accident-preventing devices, therefore they must always be perfectly legible. If damaged and
unreadable, it is mandatory to replace them, requesting the original spare from the manufacturer.
•
Disconnect the machine from the power supply after each use and prior to any cleaning and maintenance operation.

Warnings for the maintenance technician

Follow the prescriptions referred to in this manual:
•
Always use the personal protection equipment and the other means of protection.
•
Before starting any maintenance work make sure that the oven, if it has been in use, has cooled down.
•
Even if just one safety device is not calibrated or does not work, the oven must be considered no operational.
•
Remove the power supply prior to working on electrical, electronic parts and on connectors.
18