Fysic FKW-248 Setup

1. Getting started:

A
Slide the switch
to OFF (down).
B
Slide the switch
to OFF (down).

2. batteries in the outdoor sensor:

3. Time setup:

FKW-248
Jumbo Analoge Klok
Power:
clock: 1x 1.5V AA
date: 2x 1.5V C
Hesdo bv., Aziëlaan 12, 5232 BA,
p.d. MMYY
's-Hertogenbosch, The Netherlands v1.0
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Instellen:
1. zet power schakelaar
op OFF
2. stel tijd in
3. stel dag in
4. stel datum in
5. stel maand in
6. stel jaar in
7. zet power schake -
laar op ON
Bij schrikkeljaar en zomer/
wintertijd de klok handmatig
aanpassen

4. Day setup:

20. 5.
°C °C
IN OUT
5 3
FKW-248
Jumbo Analoge Klok
Power:
clock: 1x 1.5V AA
date: 2x 1.5V C
Hesdo bv., Aziëlaan 12, 5232 BA,
p.d. MMYY
's-Hertogenbosch, The Netherlands v1.0
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Instellen:
1. zet power schakelaar
op OFF
2. stel tijd in
3. stel dag in
4. stel datum in
5. stel maand in
6. stel jaar in
7. zet power schake -
laar op ON
Bij schrikkeljaar en zomer/
wintertijd de klok handmatig
aanpassen
Slide the battery cover off
the outdoor sensor
Insert 2x AA 1.5V
batteries
Slide the battery cover
back into the outdoor
sensor
Use the small red wheel to set the
actual time, for now it doesn't matter
whether it's before or after noon time.
Turn anti-clockwise
(e.g. towards your
body) to set the day.
Attention: the day appears 2x consecutively. Stop the first time it appears
when it's currently before 12 o' clock noon. If it's after 12 o' clock noon,
turn a little further until the day appears for the 2nd time.
Placing the batteries into the outdoor sensor must be
done within 1 minute after inserting the 1.5V C
batteries into the clock. The outdoor sensor will then be
linked directly with the clock.
If it takes longer before you place the batteries into the out-
door sensor, the sensor won't be linked with the clock and
the 'OUT' read-out will remain empty.
In this case, remove both the batteries from the outdoor
sensor and the C batteries from the clock and then re-insert
all of them within one minute.
FKW-248
SETUP
C
Insert 1.5V AA battery
into the clock
(+ to the right).
D
Insert 2x 1.5V C batteries
into the battery compart-
ment (+ to the left).
20. 5.
IN °C OUT °C
5 3