Pettec Modular Spray Trainer Quick Start Manual page 7

Filling the training collar
The Modular Spray Trainer must be turned off
before filling with spray. Place the filling spout
15 Sec.
positioned vertically on the filling valve. When the
filling spout is positioned correctly, fill the trainer
by pressing it down lightly for 15 seconds.
Note: To completely empty the tank of the PetTec
Modular Spray Trainer, press down lightly on the
filling valve with a screwdriver.
Attaching the collar
The collar must be properly secured so that the spray signal will be effective.
You can test for a proper fit by ensuring that you can fit one or two fin-
gers beneath the collar. The optimal position of the PetTec Modular Spray
Trainer is directly under the dog's nose.
Be careful that the collar is not too tight, but do not allow it to slip; otherwise
the spray signal will not be effective.
7