Hyundai 2010 Azera Owner's Manual page 49

1
FEATURES OF YOUR HYUNDAI
36
B230C05A-AAT
Installing a Child Restraint Seat with
the "Tether Anchorage" System
Three child restraint hook holders are lo-
cated on the rear seat package tray.
To install the child restraint seat
Child Restraint
Tether Anchor Cover
Hook Holder
1. Open the tether anchor cover on the
rear seat package tray.
Rear seat package tray
Child Restraint Hook Holders
B230C01TG
Tether Strap Hook
Front of Vehicle
2. Route the child restraint seat tether strap
over the seatback.
For vehicles with adjustable headrests,
route the tether strap under the head-
rest and between the headrest posts,
otherwise route the tether strap over the
top of the seatback.
3. Connect the tether strap hook to the
child restraint hook holder and tighten
to secure the seat.
!
WARNING:
o A child can be seriously injured or
killed in a collision if the child restraint
is not properly anchored. Always
follow the child seat manufacturer's
instructions for installation and use.
o Never mount more than one child re-
straint to a single tether or to a single
lower anchorage point. The increased
load caused by multiple seats may
cause the tethers or anchorage points
to break, causing serious injury or
death.
B230C02TG