Hyundai 2008 Veracruz Owner's Manual page 52

Safety features of your vehicle
C030102AUN-EU
Placing a passenger seat belt into
the auto lock mode
The use of the auto lock mode will
ensure that the normal movement of the
child in the vehicle does not cause the
seat belt to be pulled out and loosen the
firmness of its hold on the child restraint
system. To secure a child restraint sys-
tem, use the following procedure.
3 32
E2MS103005
To install a child restraint system on the
outboard or center rear seats, do the fol-
lowing:
1. Place the child restraint system in the
seat and route the lap/shoulder belt
around or through the restraint, follow-
ing the restraint
instructions. Be sure the seat belt
webbing is not twisted.
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct "click"
sound.
Position the release button so that it is
easy to access in case of an emergency.
OEN036101
3. Pull the shoulder portion of the seat
belt all the way out. When the shoulder
portion of the seat belt is fully extend-
ed, it will shift the retractor to the "Auto
Lock" (child restraint) mode.
manufacturer's
OEN036102