Hyundai 2009 Accent Owner's Manual page 125

Table of Contents

Advertisement

B720A01MC-AAT
DEFROSTING/DEFOGGING
Use the heating/ventilation system to defrost or defog the
windshield:
To remove interior fog on the windshield;
o Set the air flow control to the defrost (
A/C will turn on automatically.) and the air intake control
to the fresh air (
) position.
o Set the temperature control to the desired position.
o Set the fan speed control between "1" and "4" position.
NOTE:
When the A/C is operated continuously on the floor-defrost level (
on the exterior windshield. If this occurs, set the air flow control to the face level position (
to the low position.
OMC029102
To remove frost or exterior fog on the windshield;
o Set the air flow control to the defrost (
A/C will turn on automatically.) and the air intake control
to the fresh air (
) position (The
o Set the temperature control to warm.
o Set the fan speed control to position "3" or "4".
FEATURES OF YOUR HYUNDAI
) position.
) or defrost level (
), it may cause fog to form
) and fan speed control
1
1
FEATURES OF YOUR HYUNDAI
115
115
OMC029103
) position (The

Advertisement

Table of Contents
loading

Table of Contents