Bosch CMA585GS0 User Manual page 14

en Microwave
8.5 Intervals for the time settings
The interval for setting a cooking time in microwave op-
eration changes with the length of the cooking time.
Cooking time
0–1 minutes
1-3 minutes
3–15 minutes
15 minutes – 1 hour
1 hour –
1 hour 30 minutes
8.6 Changing the microwave power
Press ⁠ .
▶
Repeatedly pressing switches from the highest to
the lowest microwave power setting.
If the microwave function is only added after start-
ing, the appliance pauses. Press
8.7 Pausing operation
You can pause operation at any time.
Press or open the appliance door.
1.
a Operation is paused.
a flashes.
To continue operation, close the appliance door and
2.
press ⁠ .
a Operation continues.
a lights up.
8.8 Stopping operation
You can stop operation at any time.
Turn the function selector to the off position.
▶
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
8.9 MicroCombi
To reduce the cooking time, you can use certain of the
types of heating in combination with microwave mode.
MicroCombi mode can be used with the following
types of heating:
Hot air
¡
Hot air grilling
¡
Grill
¡
Exceptions:
Microwave power setting 900 W
¡
Hot air 40 °C
¡
Warming plates
¡
Configuring MicroCombi mode
Switch on microwave mode in addition to a type of
heating.
Set the function selector to a combinable type of
1.
heating.
a A default value for the temperature is displayed.
Set the temperature using the rotary selector.
2.
To set the required microwave power setting, press
3.
⁠ .
a A default value for the cooking time is displayed.
14
Interval
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
to start.
Use the rotary selector to set the cooking time.
4.
Press to start.
5.
a The cooking time counts down and MicroCombi
mode starts.
a Once the cooking time has elapsed, MicroCombi
mode ends automatically and a signal sounds.
Changing the microwave power
Press ⁠ .
▶
Repeatedly pressing switches from the highest to
the lowest microwave power setting.
If the microwave function is only added after start-
ing, the appliance pauses. Press
Pausing operation
You can pause operation at any time.
Press or open the appliance door.
1.
a Operation is paused.
flashes.
a
To continue operation, close the appliance door and
2.
press ⁠ .
a Operation continues.
lights up.
a
Stopping operation
You can stop operation at any time.
Turn the function selector to the off position.
▶
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
8.10 Heating and drying the cooking
compartment
Always dry the cooking compartment after operation to
ensure that no moisture remains.
Allow the appliance to cool down.
1.
Remove the worst of the food residues from the
2.
cooking compartment immediately.
Wipe any humidity from the cooking compartment
3.
floor.
4. Use the function selector to set the
ing.
Press ⁠ .
5.
Use the rotary selector to set the temperature to
6.
150 °C.
Press twice.
7.
is highlighted in the display.
a
Use the rotary selector to set a cooking time of
8.
15 minutes.
9. Press to start.
a The drying process starts and ends after
15 minutes.
Open the appliance door to allow the steam to es-
10.
cape.
8.11 Drying the cooking compartment by
hand
Always dry the cooking compartment after operation to
ensure that no moisture remains.
Allow the appliance to cool down.
1.
Remove the worst of the food residues from the
2.
cooking compartment.
Dry the cooking compartment with a sponge.
3.
to start.
type of heat-