Wall Moun Ng - LC-POWER LC-M27-4K-UHD-144 Manual

6. Wall Moun ng

1. Open the package and take out the product with foam s ll a ached. Gently
place it on a desktop or table. Remove the extra parts and the foam covering
the monitor. If the monitor is already a ached to the stand, remove the stand.
Gently put one finger into the hole of adapter then pull to remove it from the
2.
back of monitor. Follow the below picture to
onto the moun ng holes on back of monitor.
Screws x 4
Install the monitor on the wall, mount, or fixture as desired.
3.
Mount
(Not included)
Eng-5
ghten the included four screws