Stand Installa�On - LC-POWER LC-M27-4K-UHD-144 Manual

5. Stand lnstalla�on
Keep the foam underneath the monitor before a�aching the stand.
1. Open the package and take out the monitor with foam s�ll a�ached. Gently
place it on a desktop or table.
2. Take out the stem and base. Insert the stem into the base then use the
included screwdriver and two screws to fasten base to the stem.
3. Remove the foam covering the back of the monitor. Then align the stand
stem's bracket with the opening on the back of the monitor. Carefully insert
the bracket into the opening. Use four screws to fasten bracket onto the
monitor.
4. With the stand fully assembled, rea�ach it onto the back of monitor. Then
remove the remaining foam on monitor and stand it up on a flat, level
desktop or table.
Make sure the monitor is laid on a flat surface before removing the stand.
Stand Stem
Screw x 2
Base
Screw x 4
Eng-4