Stand Base x 1 Screws x 4 Screws x 5 DP Cable x 1 (For Wall Moun (For Stand Installation) LC-M34-UWQHD-100-C Power Cable x 1 User Manual x 1 ( AC 100-240V~ 50/60Hz ) Extra screws may be included as backup. Eng-2...
4. Product Overview 4.1 – Monitor Bu ons : Press to display the OSD menu or enter sub-menus. M Menu Button : Press to move down in the menus. Down Button : Press to move up in the menus. Up Button E Exit Button: Press to exit.
Page 9
8. Basic Opera Insert one end of the DP cable into your PC’s graphics card. A HDMI cable may also be used. A HDMI cables is not included. 2. Connect the other end of the cable to the corresponding connector on your monitor. 3.
9. Indicator Light Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source ,no horizontal or vertical signal has been detectde or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected. 10.
Page 11
10.1 – OSD Menu Func ons Blacklevel blacklevel 1:1, Eng-10...
Page 12
DP Version DP1.2, DP1.1 FreeSync Turn the FreeSync function on/off (Adaptive Sync) Eng-11...