Power Door Locks; Delayed Locking; Programmable Automatic Door Locks - Hummer 2008 H2 Owner's Manual

Hide thumbs Also See for 2008 H2:
Table of Contents

Advertisement

CAUTION: (Continued)
Outsiders can easily enter through an
unlocked door when you slow down or
stop your vehicle. Locking your doors can
help prevent this from happening.
There are several ways to lock and unlock your vehicle.
To unlock the door from the outside, use the keyless
entry system or the key.
To unlock or lock the door from the inside, slide the
manual lever at the top of the door up or down.

Power Door Locks

The power door lock switches are located on the
front doors.
Q
(Lock): Remove the key from the ignition and
press to lock all of the doors.
K
(Unlock): Press to unlock the doors.

Delayed Locking

When locking the doors with the power lock switch or
the keyless entry transmitter and a door or the liftgate
(if equipped) is open, the delayed locking feature
will delay locking the doors until five seconds after the
last door is closed. You will hear three chimes to
signal that the delayed locking feature is in use.
Pressing the power lock switch twice will override the
delayed locking feature and immediately lock all
the doors.
You can also program this feature using the DIC.
See DIC Vehicle Customization (With DIC Buttons)
on page 3-63.
Programmable Automatic
Door Locks
Your vehicle is equipped with an automatic lock/unlock
feature which enables you to program your vehicle's
power door locks. You can program this feature through
the Driver Information Center (DIC). See DIC Vehicle
Customization (With DIC Buttons) on page 3-63 for more
information on DIC programming.
2-11

Advertisement

Table of Contents
loading

Table of Contents