Storing A Flat Or Spare Tire And Tools (Suv) - Hummer 2008 H2 Owner's Manual

7. Make sure nothing is located under or in front of the
seat and then lift the rear driver's seat so that the
floor is exposed. See Split Folding Rear Seat
on page 1-8 for more information.
8. Place the narrow end of the tool bag under the seat
rails as shown. Slide the tool bag under the rear seat.
Be careful not to pinch the seat cables or electrical
harnesses.
9. Reinstall the strap to the seat rail.
10. Return the seat to the correct position.
5-96
Storing a Flat or Spare Tire and
Tools (SUV)
Storing the Flat or Spare Tire
Use the following art and text to help store the spare or
flat tire back into its proper location when done
changing a tire.
To store the flat or spare tire on the tire carrier:
1. Close the tire carrier. See Tailgate/Spare Tire
Carrier on page 2-16 for tire carrier operation.
2. Place the flat or spare tire onto the tire carrier with
the outside of the wheel facing out.
3. Reinstall the three nuts holding the spare or the flat
tire to the tire carrier. Tighten the nuts by hand.
4. Use the wheel wrench and wheel wrench extension
to tighten the nuts firmly.