Speedometer And Odometer; Trip Odometer; Tachometer; Safety Belt Reminders - Hummer 2008 H2 Owner's Manual

Speedometer and Odometer

Your speedometer lets you see your speed in both
miles per hour (mph) and kilometers per hour (km/h).
Your vehicle's odometer works together with the
driver information center. You can set a Trip odometer.
See "Trip Odometer" under DIC Operation and
Displays (Using DIC Buttons) on page 3-49 or
DIC Operation and Displays (Using Trip Odometer
Reset Stem) on page 3-54 for more information.
The odometer mileage can be checked without the
vehicle running. Simply press the trip stem on the
instrument panel cluster.
If your vehicle ever needs a new odometer installed,
the new one will be set to the correct mileage total
of the old odometer.

Trip Odometer

The trip odometer can tell you how far your vehicle has
been driven since you last set the trip odometer to zero.
Press the trip stem to toggle between the trip odometer
and the regular odometer. Holding the trip stem for
approximately one second while the trip odometer is
displayed will reset it.
To display the odometer reading with the ignition off,
press the trip stem.

Tachometer

Your tachometer displays the engine speed in
revolutions per minute (rpm).

Safety Belt Reminders

Safety Belt Reminder Light
When the engine is started, a chime will come on for
several seconds to remind people to fasten their safety
belts, unless the driver's safety belt is already buckled.
This chime and light is repeated if the driver remains
unbuckled and the vehicle is in motion. If the driver's
belt is already buckled, neither the chime nor the
light will come on.
The safety belt light will
also come on and stay
on for several seconds,
then it will flash for
several more.
3-33