Troubleshooting - Costco 2005077 Assembly Instructions Manual

TROUBLESHOOTING:

1. Make sure there is power to the outlet and the product is plugged in.
2. Make sure lights are connected to the adaptor and make sure the connector is fully inserted
into the adaptor and is tight.
3. Remove the connector from adaptor, clean contacts with a clean cloth and reinstall.
4. Check if the unit is plugged into an outlet controlled by a dimmer or electronic timer. The item
will not work on these circuits. Use a standard outlet.
5. If connected to a GFCI-controlled outlet, reset the GFCI.
6. Unplug the item and check for broken wires or connections.
ENCLOSED PARTS:
Base
Snowman Arms
C-bulb string light
ADAPTOR:
Connecting the light string to the end connects (if
present).
Bottom Post
Scarf Collar
4 reusable nylon cable ties
Attaching the Adaptor and Light Strings to End Connects
* Adaptor design will vary depending upon destination country
USER MAINTENANCE AND STORAGE:
1. This seasonal use product is not intended for permanent installation or use.
2. For best performance, install the item on a flat and level surface. Do not install on a rooftop or
hillside.
3. For indoor and outdoor use.
4. Store unit in a cool, dry location protected from sunlight.
5. Avoid stacking assembled items to avoid bulb breakage or other damage.
6. Make sure all plugs and cords are well-protected from being cut, crushed, or otherwise
damaged.
7. Before using or reusing, inspect product carefully.
8. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the
bulb holders or enclosures, loose connections, or exposed copper wire.
Middle Post
Scarf Ribbon
16 Non-reusable nylon cable ties
Connection on adaptor.
Top Post
C Bulb Frame
4 Ground Stakes
*Adaptor design will vary depending
upon destination country
Plug the connection on the light string into the adaptor and
screw until tight.
Snowman
Adaptor