Hummer 2007 H2 Owner's Manual page 278

DVD Control Buttons
To bring up the DVD control buttons, briefly press
the power button located on the face of the
monitor. This toggles the on-screen soft key
choices to either monitor or DVD control.
If the power button is pressed for more than
two seconds, the power could turn off.
AV Input Jack (Audio/Video Input Jack): The
audio/video input jack allows viewing of auxiliary
sources such as portable DVD players, game
278
stations, or video cameras, on each monitor
individually. The AV input jack is located on the
lower left side of the monitor and is identified
on the monitor as the AUX (auxiliary) input jack.
(Power): Press this button to turn the DVD
P
player on and off. Press this button briefly to toggle
between monitor and DVD on-screen functions.
(Eject): The eject button is located on the
X
DVD player next to the DVD loader slot. Press this
button to eject the disc. If the ejected disc is
partially left in the DVD player, the disc does not
reload until it is pushed back into the player.
r
(Play): Press the soft key button on the
monitor, located under the play symbol to start
playback of a disc. On DVDs and video CDs with
playback control (PBC), menu screens can display
automatically. It might be necessary to press the
play soft key button again to begin playing.
There is a play position memory feature for DVD
and video CD only. If the DVD player is turned off
and then turned back on, the DVD player resumes
playback from the same point it stopped. The play
position memory is erased if the disc is removed.