Advertisement
Table of Contents
Note on the Carrying Bag
The carrying bag is not provided with the PJ WX4130NM.
Default Setting for Auto Keystone
The default setting for [Auto Keystone] under the [Default Settings] menu is [Off].
Notes for Users of the PJ WX4130NM
The PJ WX4130NM is the wall mount model. The following is information about this model.
For other information, see the manuals supplied with the projector.
Installation Method
The PJ WX4130NM can be installed in the following two ways:
•
•
© 2012 Ricoh Co., Ltd.
Printed in China
EN GB
EN US
EN AU
Y012-7563A
If the projector is installed on a wall or projection screen incorrectly, the projector may
fall down and cause an injury. Contact your sales or service representative if you want to
install the projector on a wall or projection screen.
Standard
CTX001
Rear
CTX002
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ricoh PJ WX4130NM
Summary of Contents for Ricoh PJ WX4130NM
- Page 1 Default Setting for Auto Keystone The default setting for [Auto Keystone] under the [Default Settings] menu is [Off]. The PJ WX4130NM is the wall mount model. The following is information about this model. For other information, see the manuals supplied with the projector.
- Page 2 Notes on the Adjustable Feet Contact your sales or service representative when cleaning the wall-mounted projector The PJ WX4130NM is not equipped with adjustable feet. You cannot adjust the angle of or replacing its parts. projection using the adjustable feet as explained in the manual.
Need help?
Do you have a question about the PJ WX4130NM and is the answer not in the manual?
Questions and answers