Configuring Pointer Display
You can configure pointer display, including whether the pointer is visible or not.
Pointer display
Pointer visibility can be set to [On], [Shtg standby], or [Off].
• Select [Shtg standby] to keep the pointer visible from when you look through the
viewfinder until the moment you confirm the subject to focus on using eye control.
• The pointer may not always be displayed, depending on the state of the camera.
• In [
] focus mode, setting [
Sensitivity
Sensitivity of the pointer in response to eye movement is adjustable.
• Set toward the positive end to make the pointer responsive even to subtle eye
movement.
• Set toward the negative end to make the pointer less responsive.
Color
Choose [Orange], [Purple], or [White] as the pointer color.
Display size
Choose [Standard] or [Small] as the pointer display size.
: Focus guide] to [On] makes the pointer visible.
91