Power Saving - Canon EOS R3 Advanced User's Manual

Power Saving

You can adjust the timing of when the screen dims and then turns off, when the camera
turns off, and when the viewfinder turns off after the camera is left idle (Screen dimmer,
Screen off, Auto power off, and Viewfinder off).
1.
Select [ : Power saving].
2.
Select an option.
Note
[Screen dimmer] and [Screen off] apply while the shooting screen is displayed.
These settings do not apply during menu display or image playback.
The camera turns off during menu display or image playback after the time set in
[Screen dimmer], [Screen off], and [Auto power off] elapses.
[Viewfinder off] also applies while the screen is still on. After this time elapses, the
viewfinder sensor is deactivated.
Only [Viewfinder off] applies during viewfinder display. After this time elapses, the
viewfinder sensor is deactivated and the viewfinder turns off.
Images on the screen are displayed at a lower frame rate after the screen dims
during still photo shooting standby.
884