Table of Contents
Advertisement
Auto detecting
The camera detects 50.0–2011.2 Hz light sources and displays a suitable shutter speed for
shooting under light sources that flicker at high frequencies. You can then switch to the
indicated shutter speed.
1.
Set the desired shutter speed.
2.
Select [Auto detecting].
3.
Select [OK].
Set the shutter speed you would prefer to shoot at. For light sources
that flicker at high frequencies, the camera will determine a suitable
shutter speed near this value.
It may improve HF flicker detection accuracy to magnify, as much as
possible, any areas affected by banding.
189
Advertisement
Table of Contents
Troubleshooting
