Honda 2008 Element Owner's Manual page 212

Main Menu
Lights
Replacing a Rear License Plate
Bulb
LENS
HOUSING
CLOTH
SCREWDRIVER
1. Using a cloth to prevent scratches,
insert a small flat-tip screwdriver
between the left edge of the lens
and the housing. The lens will
come down.
2. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
208
Table Of Contents
3. Turn on the parking lights and
check that the new bulb is
working.
4. Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
2008 Element
Replacing a High-mount Brake
Light Bulb
BULB
TAB
LENS
1. Open the hatch. Remove the light
assembly cover by pushing in on
the tabs on both sides and pulling
the cover down.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
TAB
COVER