Honda 2008 Element Owner's Manual page 211

Main Menu
Replacing Rear Bulbs
TAILLIGHT ASSEMBLY
1. Open the hatch and the tailgate.
Remove the two mounting screws
with a Phillips-head screwdriver,
and remove the taillight assembly
from the body by pulling it back.
2. Determine which of the three
bulbs is burned out: brake/
taillight, turn signal light or back-
up light.
Table Of Contents
SOCKET
SCREW
SCREW
SOCKET
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
2008 Element
5. Reinstall the socket into the light
assembly by turning it clockwise
SOCKET
until it locks.
6. Test the lights to make sure the
new bulb is working.
7. When reinstalling the taillight
assembly, first place the two pins
in the holes in place. Tighten the
two mounting bolts.
Lights
207