Power Door Locks; Rear Door Security Locks (Crew Cab) - GMC 2006 Canyon Owner's Manual

Power Door Locks

Driver's Switch Shown,
Front Passenger's
Switch Similar
Press L (lock) to lock all the doors at once. To unlock
all the doors, press U (unlock).
On crew cab models, use the manual door lock lever on
each rear door to lock or unlock the doors from the
rear seating areas.
2-8
If your vehicle has power
door locks, the switches
are located on the driver's
and the front passenger's
armrests.
Rear Door Security Locks
(Crew Cab)
If your vehicle is a crew cab model, it may have rear
door security locks. With this feature, you can lock the
rear doors so they cannot be opened from the inside.
To engage the security locks, do the following:
1. Open one of the rear doors.
2. Using your ignition key, turn the lock to the
horizontal position.
3. Close the door.
4. Repeat these steps on the other rear door.
The rear door security lock
is located on the inside
edge of each rear
door below the security
lock label.