Fan Knob - GMC 2006 Canyon Owner's Manual

Fan Knob

9
(Fan): The center knob on the control panel is
used to control the fan speed. Turn the knob clockwise
or counterclockwise to increase or decrease the fan
speed.
If the knob is set on "0" (zero), some outside air will still
enter the vehicle and will be directed according to
the position of the mode knob.
Mode Knob
The right knob on the control panel is used to direct the
airflow inside your vehicle. Turn the knob to select
one of the following modes:
H
(Vent): Select this mode to direct air to the
instrument panel outlets.
\
(Bi-Level): Select this mode to direct approximately
half of the air to the instrument panel outlets, and the
remaining air to the floor outlets and the defroster
and side window outlets. Cooler air is directed to the
upper outlets and warmer air to the floor outlets.
[
(Floor): Select this mode to direct air to the floor
outlets. Recirculation is disabled in this mode because
interior window could fog under some conditions. If
this occurs, see "Defogging and Defrosting" following.
3-20
Mode Buttons
@
(Recirculation): If your vehicle has air
conditioning, you will have the recirculation feature.
This mode recirculates air inside the cabin, and prevents
outside air from coming in the vehicle. It can be used
to prevent outside odors from entering your vehicle and
cool the air inside your vehicle more quickly. Press
this button to turn the recirculation mode on or off.
An indicator light on the button will come on to let you
know the recirculation mode is activated.
Recirculation is only available in the bi-level and vent
modes. It should only be used while in bi-level and vent
modes. Recirculation is not available, and the light
will not come on or flash while in heat, floor, floor/defog,
or defrost modes.
#
(Air Conditioning): Your vehicle may have air
conditioning. Press this button to turn the air-conditioning
system on or off. An indicator light on the button will
come on to let you know the air conditioning is activated.
When the system is on, this setting cools and
dehumidifies the air entering your vehicle.
The air conditioning will not function if the fan is
turned off.