GMC 2003 Savana Van Owner's Manual page 357

60,000 Miles (100 000 km)
0
0
u
0
0
Check rearlfront axle fluid level and add fluid as
needed. Check constant velocity joints and axle seals
for leaking.
Clean and repack the front wheel bearings (or at
each brake relining, whichever occurs first).
Rotate tires. See Tire Inspection and Rotation on
page 5-62 for proper rotation pattern and additional
information. (See footnote
+.)
Replace fuel filter. An Emission Control Service. (See
footnote f.)
Vehicles With GVWR Above 10,000 Ibs. Only:
Inspect shields for damage or looseness. Adjust or
replace as required. This is a Noise Emission Control
Service. Applicable only to vehicles sold in the
United States.
Inspect Evaporative Control System. Check all fuel
and vapor lines and hoses for proper hook-up,
routing and condition. Check that the purge valve
works properly, if equipped. Replace as needed. An
Emission Control Service. (See footnote
t.)
67,500 Miles (1 12 500 km)
0 Check readfront axle fluid level and add fluid as
needed. Check constant velocity joints and axle seals
for leaking.
page 5-62 for proper rotation pattern and additional
information. (See footnote
+.)
0
Rotate tires. See Tire Inspection and Rotation on
75,000 Miles (125 000 km)
0
D
Check readfront axle fluid level and add fluid as
needed. Check constant velocity joints and axle seals
for leaking.
Vehicles With GVWR Above 10,000 Ibs. Only:
Inspect shields for damage or looseness. Adjust or
replace as required. This is a Noise Emission Control
Service. Applicable only to vehicles sold in the
United States,
Rotate tires. See Tire Inspection and Rotation on
page 5-62 for proper rotation pattern and additional
information. (See footnote +,)
82,500 Miles (137 500 km)
0 Check readfront axle fluid level and add fluid as
needed. Check constant velocity joints and axle seals
for leaking.
page 5-62 for proper rotation pattern and additional
information. (See footnote +.)
CI Rotate tires. See Tire Inspection and Rotation on
90,000 Miles (150 000 km)
0
Check readfront axle fluid level and add fluid as
needed. Check constant velocity joints and axle seals
for leaking.
each brake relining, whichever occurs first.)
0
Clean and repack the front wheel bearings (or at
6-8