Display Indications - Canton Smart Soundbar 10 Short Manual

DISPLAY INDICATIONS

The Soundbar 10 has an On-screen display (menu visible on the TV), a LED
status indicator (green or red) and a LED display (in the front of the Soundbar
10).
On-Screen display
All settings and the configuration of the Soundbar 10 can be conveniently
performed via the On-screen display on your TV screen. To do this, the Sound-
bar 10 must be connected to your TV via a HDMI
structured and all changes you make on Soundbar 10 are displayed on your TV.
By pressing the menu button (M) on the Smart-remote, you can access the main
menu.
Practical tip:
• To change the language of the On-screen display from German to English,
please go to the main menu by pressing the button „M". Under „System-
einstellung" [SYS] select the menu item „Displayeinstellungen" [UIS] and
change the language under the menu item „Sprache" [LAN].
LED status indicator
When you switch on Soundbar 10, the Status LED lights up green. In standby
mode, the Status LED lights up red.
LED display
The LED display is located in the front of the Soundbar 10 and lights up for
five seconds when a command is sent. It indicates the selected function as
abbreviation or scroll text. The most important display indications and their
meanings are listed here:
cable. The menu is simple and
®
English
3 3 3