Packaging Content; Setup - Canton Smart Soundbar 10 Short Manual

PACKAGING CONTENT

d
Carefully unpack the Soundbar 10 and check that the delivery content is com-
plete and undamaged. If any part is damaged, do not use it, but contact our
service department (see back cover). Please keep the packaging during the
ch
warranty period.
ny
d
ot
Delivery content:
e
1x Smart Soundbar 10
ot
1x Smart-remote
t. 1x Power cord
1x HDMI cable (3m)
1x Optical digital audio cable (1,5m)
1x Coaxial digital audio cable (1,5m)
1x Analog stereo audio cable (1,5m)
1x Short manual
4x Equipment feet large (20mm)
4x Equipment feet small (12mm)

SETUP

Place the Soundbar 10 in the desired location and connect it to the power
outlet using the power cord. To connect the Soundbar 10 to your TV or other
devices, please make sure that they are connected to the mains supply. If you
want to connect your Soundbar 10 to your WiFi, make sure your WiFi router is
active and has access to the Internet.
English
3 2 9