Windshield Wipers - GMC 2000 Envoy Owner's Manual

Flash-To-Pass Feature
This feature lets you use your high
to signal a driver in front of you that you want to
pass. It works even if your headlamps are in the
automatic position.
To use it, pull the turn signal lever toward you,
but not so far that you hear a click.
If your headlamps are in the automatic position or on
-
low beam, your high beam headlamps will turn on.
They'll stay on as long as you hold the lever toward you
-
and the high beam indicator on the instrument panel
cluster will come on. Release the lever to return to
normal operation.
2-34
-
beam headlamps

Windshield Wipers

You control the windshield wipers by turning the band
with the wiper symbol on it.
For a single wiping cycle, turn the band to MIST. Hold
it there until the wipers start, then let go. The wipers will
stop after one wipe. If you want more wipes, hold the
band on MIST longer.
You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow. Turn the band to choose the delay time. The
closer to LO, the shorter the delay.