Table of Contents
Advertisement
Replacing the Rear Seat
1. Position the seat into the open slots i n both rails.
Make sure that the latch levers at the front of the seat
are i n the
up position.
2. Roll the seat to the set location and lock
into place.
3. Lower the latch 1eve.r by lifting u p on the release
located at the mid-position
of
each seat support.
Check
that
both sides of the seat are locked securely
by trying
t o
move the seat forward and backward.
A
click should
be
heard when the seat is locked in place.
4. At the floor, replace the plastic trim covers i n front
of and behind the seat supports.
5 .
Connect the quick release
latch plates for the lap
shoulder
belts
by inserting the latch plates into the
buckles attached at the outboard positions of the
bench
seat.
1-7
Advertisement
Table of Contents
